Quatro CT set-up

[GdnrBob]

@Brad O,

Thanks for answering that.

B

[Holmz]

@Brad O if someone set up say the Quatro or one of the subs in a room… and then changed amps… should they then only need to get the M5-HPB correct and the system would not need the spectrol tool?

Edited December 5, 2022 by Holmz

[Richard Vandersteen]

4 hours ago, Holmz said:

@Brad O if someone set up say the Quatro or one of the subs in a room… and then changed amps… should they then only need to get the M5-HPB correct and the system would not need the spectrol tool?

No need to redo the room EQ (unless the sub or speakers have been moved) just get the high pass correct and play music.  If the new amplifiers sound is significantly different you may want to tweak the Contour or Level controls on the sub amplifier.   RV

[TomicTime]

4 hours ago, Holmz said:

@Brad O if someone set up say the Quatro or one of the subs in a room… and then changed amps… should they then only need to get the M5-HPB correct and the system would not need the spectrol tool?

Don’t move the speakers or main..much…and no would not need a run thru vandertones….

The change of dip switch settings is because the filter point is a function of amplifier input impedance. The tool - a plastic jewlers screwdriver in essence is to adjust the 11 bands of EQ to at least partiall correct for room mode issu….

4 hours ago, Holmz said:

@Brad O if someone set up say the Quatro or one of the subs in a room… and then changed amps… should they then only need to get the M5-HPB correct and the system would not need the spectrol tool?

 

[TomicTime]

it’s always a relief when i get the answer correct.except RV beat me 2 it…..

[GdnrBob]

19 hours ago, TomicTime said:

it’s always a relief when i get the answer correct.except RV beat me 2 it…..

You have to get up early in the morning to beat Pops.😉

B